Get quotes for a used or replacement Škoda Karoq wheel trims. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two wheel trimss are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
Wheel trims are the plastic covers that clip over steel wheels to smarten their appearance, and yes, the Karoq does have them on entry-level and mid-range variants that came with steel wheels rather than alloys. Higher-specification Karoqs typically left the factory on alloy wheels, so those cars never had trims fitted at all. If your Karoq has steel wheels, trims are a genuine used part worth searching for; if it has alloys, you'll want to look for alloy wheels or alloy wheel covers instead.
The Škoda Karoq launched in 2017 and received a facelift in 2021, so a 2018 car is pre-facelift and a 2022 car is post-facelift. The wheel rim diameter and steel wheel dimensions can carry over across generations, but whether the trim clips and centre-cap sizing are identical across that facelift boundary is something you should confirm with the breaker against both registration numbers before buying. Wheel diameter (typically 16-inch on steel-wheeled variants) is the starting point, but clip fitment is what makes or breaks the swap.
Trim level itself does not affect the physical fitment of wheel trims, because what matters is the diameter and offset of the underlying steel wheel rather than whether the car is badged SE, SE Drive, or SE Technology. However, different trim levels may have come with different-diameter steel wheels, so always match on wheel size rather than trim name. Expect cosmetic differences if you're mixing trims from different model years, as the cap design can vary.
Yes, size is critical - a 16-inch trim will not properly clip onto a 17-inch steel wheel and vice versa, so you must match the trim diameter exactly to the rim diameter on your car. Check the tyre sidewall or the door jamb sticker to confirm your wheel size before approaching a breaker. Most steel-wheeled Karoqs use 16-inch rims, but confirm yours before ordering.
The Karoq and Ateca share the same MQB platform and steel wheel specifications, so there is a reasonable chance that trims designed for the same wheel diameter would physically fit, but clip patterns and centre-cap sizing can differ between brands even on shared platforms. This is worth raising directly with the breaker, quoting both registration numbers, as they'll know from experience which parts cross-fit. Never assume platform compatibility alone guarantees trim fitment.
Breakers can often supply individual trims rather than a full set of four, which makes this a cost-effective repair, but you should confirm the exact wheel diameter and, if possible, the part number from your existing trim before contacting them. Pre-facelift (2017-2021) and post-facelift (2021 onwards) Karoqs may use slightly different trim designs, so mention your registration to the breaker so they can match the correct generation. Condition varies with used trims, so ask about clip integrity as well as cosmetic condition.