Compare prices on a used Škoda Kamiq instrument cluster from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used instrument clusters vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
The Škoda Kamiq launched in 2019 and received a facelift in 2021, so a 2020 cluster comes from the pre-facelift generation while a 2022 car is a facelifted model — these are different variants and the cluster may not be a straight swap. Name the generation boundary to the breaker and ask them to confirm against your registration before buying, as software and connector changes between pre- and post-facelift cars can affect compatibility. Never assume a cluster from the other side of a facelift will plug straight in.
Engine choice does not affect instrument cluster fitment on the Škoda Kamiq — the cluster is an interior part matched by generation, not by whether you have the 1.0 TSI or 1.5 TSI under the bonnet. Give the breaker your registration and confirm the generation matches rather than worrying about engine codes.
Trim level can influence the instrument cluster because higher trims on the Kamiq, such as SE L and Monte Carlo, may be fitted with Škoda's Virtual Cockpit digital display rather than the analogue dials found on entry-level SE models. Confirm with the breaker exactly which display type your car has — standard analogue or Virtual Cockpit — and make sure the replacement matches, as these are different units and are not interchangeable. Always quote your registration so the breaker can verify the correct part.
This question crosses the 2021 facelift boundary, so fitment is not guaranteed — the 2019 car is pre-facelift and the 2021 car may be either the last pre-facelift or an early facelifted model depending on its build date. Name both registration numbers to the breaker and ask them to cross-reference the part numbers before purchasing, as facelifts commonly bring changes to instrument cluster connectors or software calibration. Do not rely on production year alone to confirm compatibility.
Replacing an instrument cluster on a modern car like the Škoda Kamiq typically requires the unit to be coded or calibrated to the vehicle using specialist diagnostic equipment, as it communicates with the car's CAN bus network — simply swapping the physical unit is usually not enough. Most owners find this a job for a Škoda dealer or a competent independent specialist with the right software, rather than a home DIY job. Ask the breaker whether the unit comes with any coding information, and budget for professional fitting and programming.
The Monte Carlo is a trim-specific variant of the Kamiq, and its instrument cluster — particularly if it features the Virtual Cockpit digital display — may differ from the analogue unit fitted to lower trims. Physically swapping a Monte Carlo cluster into a standard Kamiq may not work without additional programming, and the display type may not match your car's existing wiring or BCM setup. Confirm the exact part numbers and display type with the breaker against your registration before committing to a purchase.