Get quotes for a used or replacement Škoda Fabia gear stick. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used gear stick varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
Yes, generation matters significantly. The Fabia has run across three main generations: Mk1 (2000–2007), Mk2 (2007–2014), and Mk3 (2015–2021), and the internal gearbox architecture changed between these, meaning a gear stick assembly from one generation is very unlikely to physically interchange with another. Within a generation, fitment is much more likely but still depends on your gearbox type and engine code — supply your registration and engine code to the breaker so they can match correctly.
A 2010 Fabia is Mk2 (2007–2014) and a 2015 Fabia is Mk3 (2015–2021), so these sit in different generations with different gearbox families — a straight swap is very unlikely. Even if the selector mechanism looks similar, mounting points and linkage geometry typically differ across this boundary. Always confirm cross-generation compatibility directly with the breaker against both registrations before buying.
The Fabia has been offered with both manual and automatic (DSG/semi-automatic) gearboxes, and the type of selector or gear stick differs between them — a manual has a conventional gear stick, while DSG or automated variants use a different selector unit. When searching for a replacement, it is essential to know whether your car is manual or automatic and to supply your engine code, as this determines which gearbox type was fitted. Confirm the exact selector type with the breaker against your registration to make sure you are ordering the right unit.
Within the Mk2 (2007–2014) the engine code is the most reliable guide to which gearbox and therefore which gear stick assembly was fitted, because different engines used different gearbox variants even within the same generation. A petrol 1.2 unit, for example, may use a different gearbox to a 1.6 TDI diesel, so the gear sticks and linkages may not interchange directly. Give the breaker your engine code — visible on your V5C or via a VIN check — alongside your registration for the closest match.
Trim level — whether that's Classic, SE, Elegance, Monte Carlo, or vRS — does not affect which gear stick mechanism is fitted, as this is determined by the gearbox and engine combination rather than the badge. You may find cosmetic differences in the gear knob itself (stitching, material, or finish) between trims, so the knob on a breaker's car may look different to yours even if the mechanism underneath is identical. Focus on matching the gearbox type and engine code rather than the trim name, and flag any cosmetic preference to the breaker separately.
A 2017 Fabia sits in the Mk3 generation (2015–2021), so start by confirming you need a Mk3-spec unit. The single most useful detail you can give a breaker is your engine code, which you'll find on your V5C logbook or through a VIN check, as this identifies your exact gearbox variant. Also confirm whether your car is manual or automatic, and be aware that questions around any ECU pairing or fitting adjustments are best raised directly with the breaker rather than assumed — never guaranteed without checking against your specific registration.