Findapart

Used Škoda Enyaq Heater Motor

Get quotes for a used or replacement Škoda Enyaq heater motor. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

A buyer's guide to used Škoda Enyaq heater motor

No two heater motors are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:

Other used Škoda Enyaq parts

Used heater motor for other Škoda models

Fitment questions

Does the Škoda Enyaq actually have a heater motor?

Yes, the Enyaq is an electric vehicle and does have a heater blower motor (also called a blower fan or HVAC motor) as part of its climate control system — unlike a traditional combustion engine car, it does not use engine heat, so the electric heater system including the blower motor is actually a core component. All Enyaq variants, whether the rear-wheel-drive single-motor or the four-wheel-drive iV 80x and RS versions, share the same basic HVAC setup and will have this part. If you have seen a listing describing it as a 'heater blower motor' or 'cabin fan motor', that is the same part.

Will a heater motor from a 2021 Enyaq fit my 2024 Enyaq after the facelift?

The Enyaq launched in the UK in 2021 and received a facelift in 2024, which brought changes to exterior styling and some interior updates. The blower motor sits within the HVAC housing and may well be shared across the pre-facelift and post-facelift cars, but because the 2024 revision is relatively recent and some interior components did change, you should confirm the exact part number with the breaker against your registration before buying.

Does the trim level affect which heater motor I need — does it matter if mine is an Enyaq 60, 80, or RS?

Trim and battery variant — whether your car is a 60, 80, iV 80x, Sportline, or RS — does not affect the heater blower motor, as this is a climate control component common across the range regardless of drivetrain output or trim level. You may find minor differences in the connector or bracket depending on whether the car has a heat pump option fitted, so it is worth asking the breaker to cross-reference the part number against your registration to be certain. The core blower unit itself is not trim-specific.

Does it matter if my Enyaq has a heat pump fitted when looking for a replacement heater motor?

The Enyaq was offered with an optional heat pump system, which works alongside the standard HVAC setup to improve efficiency in cold weather. The blower motor itself is generally the same part regardless of whether the heat pump is fitted, but ancillary components and connectors in the heater box area can differ between heat pump and non-heat pump cars. Confirm with the breaker whether the car they are breaking has or does not have the heat pump, so you can make sure you are getting the right assembly.

Can I use a heater motor from a Volkswagen ID.4 or SEAT Ateca in my Enyaq?

The Enyaq shares the MEB electric platform with the Volkswagen ID.4 and Audi Q4 e-tron, meaning there is genuine parts commonality across those models, and the HVAC blower motor may well interchange with ID.4 units of the same generation. The SEAT Ateca uses a completely different platform and combustion engine architecture, so its blower motor would not be applicable. Cross-platform compatibility with MEB siblings is plausible but should be confirmed with the breaker using part numbers before purchasing.

How do I describe the part correctly when asking a breaker for a Škoda Enyaq heater motor?

Ask for the 'heater blower motor' or 'HVAC blower motor' and give the breaker your full registration number so they can look up the exact part number. It is also helpful to let them know the model year, your trim level, and whether your car has the heat pump option, as these details help them pull the right unit from the car they are dismantling. Providing your VIN if you have it gives the breaker the most accurate way to confirm the part matches your vehicle.