Findapart

Škoda Enyaq Quarter Panel Replacement Parts

Compare prices on a used Škoda Enyaq quarter panel from UK breakers. Free part request, no obligation.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Choosing the right used Škoda Enyaq quarter panel

Used quarter panels vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:

Also known as: rear quarter.

Other used Škoda Enyaq parts

Used quarter panel for other Škoda models

Fitment questions

Will a quarter panel from a 2021 Enyaq fit my 2023 Enyaq?

The Enyaq launched in 2021 on the MEB platform and received a facelift in 2023, so a pre-facelift panel from 2021-2022 and a post-facelift panel from 2023 onwards are distinct generations with potential pressing differences at the rear quarters. You can confidently name 2023 as the facelift boundary, but whether panels either side of that line physically interchange is exactly the kind of mid-generation change you should confirm with the breaker against your registration number before buying.

Does it matter whether the Enyaq is an iV 60, iV 80, or iV 80x when sourcing a quarter panel?

No — the battery size and drivetrain (the iV 60, iV 80, and iV 80x designations) have no effect on the body pressings, so a quarter panel from any of those variants will be the same panel as long as the body style and model year match. What matters is the generation and whether the car is pre- or post-facelift, not which powertrain is under the floor. Tell the breaker your reg and let them confirm the exact panel, but don't worry about filtering by drivetrain spec.

Does the trim level affect which quarter panel I need — for example, does a Loft or Sportline need a different panel to a standard Enyaq?

Trim level — whether it's a base Enyaq, Loft, Lounge, Sportline, or any other grade — does not affect the quarter panel pressing itself, so fitment is the same across the range for a given body style and year. However, you may find cosmetic differences such as trim clips, moulding attachment points, or colour-coded versus contrasting finishes depending on the trim the donor car carried, so check those details with the breaker. The panel will physically fit regardless of trim, but budget for any finishing differences.

Is the Enyaq Coupé quarter panel the same as the standard Enyaq quarter panel?

No — the Enyaq Coupé has a distinct sloping roofline and different rear body pressings compared with the standard Enyaq hatchback, so the quarter panels are completely different parts and are not interchangeable. Always specify to the breaker whether your car is the standard Enyaq or the Enyaq Coupé, as this is the single most important question for getting the right panel. Confirm with the breaker against your registration to make sure they pull from the correct body style.

Will a quarter panel from a right-hand-drive Enyaq fit my car if the breaker only has a left-hand-drive one?

Quarter panels are handed by side — nearside (NS, left/passenger side in the UK) and offside (OS, right/driver side in the UK) — but the drive configuration of the donor car makes no difference to whether the panel fits, since the body pressings are the same regardless of whether the car was built as RHD or LHD. Just make sure you're ordering NS for NS or OS for OS, and confirm the model year and body style match. The breaker should be able to verify this against your reg.

Can I use a quarter panel from a 2022 Enyaq on my 2024 facelifted model?

The 2023 facelift is a well-established boundary for the Enyaq, meaning a panel from a 2022 pre-facelift car and one from a 2024 post-facelift car come from either side of a known generation change. Whether the pressings are actually different enough to prevent fitment across that boundary is something you must confirm with the breaker using your registration number, as mid-generation pressing changes are not always publicly documented in full detail. Don't assume compatibility just because the platform is shared.