Nissan X-Trail Windscreen Replacement Parts

These two cars sit in different generations — the T31 (second generation, roughly 2007–2013) and the T32 (third generation, 2014 onwards) — so a 2014 screen is a T32 and a 2013 or earlier is a T31, and the two are not interchangeable. However, if both cars are T32s, the generation is the same and fitment is more likely, but you still need to check whether your car has an ADAS camera bracket or heating elements, as these vary within the T32 range. Confirm the exact part details with the breaker against your registration before buying.

No — the T31 (second generation, 2007–2013) and the T32 (third generation, 2014 onwards) are completely different platforms, and their windscreens are not compatible. Always quote your generation to the breaker and confirm against your registration to avoid an expensive mistake.

Trim level — whether Acenta, N-Connecta, Tekna, or any other — does not affect which windscreen shell fits your X-Trail. What does matter is whether your car has a heated windscreen or an ADAS camera bracket (common on higher trims like Tekna), so a plain screen from a lower-spec car may physically fit but leave you without those features. Check with the breaker that the screen matches your car's heated and camera-bracket spec, not just the trim name.

Look at the top of your current windscreen on the inside — if there is a plastic mounting pod or bracket near the rear-view mirror, your car has an ADAS forward-facing camera and you need a replacement screen with the same bracket provision. Fitting a screen without the correct bracket means the camera cannot be remounted properly, which can affect lane-keep assist and automatic emergency braking. Confirm with the breaker that the donor screen matches your car's camera setup against your registration, as bracket designs can vary even within the same generation.

Yes, it does matter — if your X-Trail has a heated windscreen (typically identified by fine heating elements across the glass or a heated wiper rest zone), you need a like-for-like replacement to retain that function. Fitting an unheated screen in place of a heated one is a straightforward physical swap in most cases, but you will lose the heating feature entirely. Tell the breaker whether your screen is heated or not so they can match it correctly.

The T32 X-Trail received a facelift in 2017, and while the body shell is the same generation, it is worth checking whether any changes to the ADAS camera bracket or sensor mounting were introduced on your specific car. The screen aperture is generally the same across T32 models, but bracket and heating spec differences are the real risk here. Confirm with the breaker using your registration to make sure the donor screen's brackets and features match your exact build.