Nissan NV400 Door Handle Replacement Parts

The NV400 ran from 2010 onwards, with a facelift arriving around 2014, so handles from within the same generation are your safest bet. A pre-facelift handle (2010–2014) may not match a post-facelift van (2014 onwards) due to subtle changes in the door skin and mounting points around the refresh. Name the generation boundary when you contact a breaker and ask them to cross-reference the handle against your exact registration before buying.

Yes, this is one of the most important details to get right – door handles are side-specific and will not swap between NS (nearside, passenger/left) and OS (offside, driver/right). When quoting, always specify NS or OS alongside your year, as breakers will need both pieces of information to pull the correct part. Fitting the wrong side is not an option, so double-check your own van before ordering.

It can do – the NV400 is available in short, medium, and long wheelbase variants, and the rear sliding door dimensions can differ between them, which may affect handle fitment. Always tell your breaker your exact wheelbase (L1, L2, or L3) when asking about a sliding door handle, as opposed to a hinged rear or cab door handle. Confirm the specific part against your registration with the breaker before committing to a purchase.

Trim level does not affect the physical fitment of a door handle – the mounting points and door frame are the same regardless of whether your van is a basic SE or a higher-spec Tekna. The only difference you might notice on a used handle is the finish or colour, but as that can be resprayed or matched, it is a cosmetic issue rather than a fitment one. Focus on getting the correct side, generation, and door type (sliding or hinged) right, and trim level can be set aside.

The Renault Master, Vauxhall Movano, and Nissan NV400 share a common platform and many body panels, so there is a reasonable chance of crossover, but this is not guaranteed for every handle style or model year. Generation alignment matters here too – a Master from the same post-2010 generation is more likely to be compatible than one from a different era. Route this cross-make question to your breaker with both registrations so they can verify the part numbers match before you buy.

No, the sliding cargo door handle and the front cab door handles are different parts with different mechanisms and mountings, so they are not interchangeable. When contacting breakers, be specific about which door you need – nearside or offside front cab door, or the sliding side door – as well as your wheelbase, since sliding door fitment can vary across the L1, L2, and L3 body lengths. Getting this detail right upfront will save you a wasted journey or return.