Cheap Mazda CX-3 Starter Motor
Need a used Mazda CX-3 starter motor? Request a free quote from UK vehicle dismantlers and compare offers direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Buying a used Mazda CX-3 starter motor: what matters
Fitment on a used starter motor varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
- State whether it's petrol or diesel
- State the engine code if known
Other used Mazda CX-3 parts
- Used Mazda CX-3 Fuel Filter
- Used Mazda CX-3 Oil Pump
- Used Mazda CX-3 Gearbox
- Used Mazda CX-3 Alternator
- Used Mazda CX-3 Sill
- Used Mazda CX-3 Wheel Arch Liner
- Used Mazda CX-3 Brake Discs
- Used Mazda CX-3 Door Card
- Used Mazda CX-3 Air Conditioning Condenser
- Used Mazda CX-3 Radio
- Used Mazda CX-3 Bulkhead
- Used Mazda CX-3 Parking Sensor
Used starter motor for other Mazda models
Fitment questions
Does a starter motor from a 2016 Mazda CX-3 fit a 2018 Mazda CX-3?
The Mazda CX-3 was sold in the UK as a single generation running from 2015 onwards, with a facelift arriving around 2018, so a 2016 and a 2018 car share the same basic platform and engine family. Fitment depends primarily on whether both cars share the same engine code, which you can find on your V5C or through a VIN check. Parts from within the same engine code should be strong candidates, but confirm with the breaker against your registration whether any ancillary or mounting changes were introduced around the facelift before purchasing.
Will a starter motor from a petrol CX-3 fit a diesel CX-3?
No — petrol and diesel engines have very different starter motor requirements, including different power ratings and physical fittings, so they are not interchangeable. The UK CX-3 was offered with both petrol (2.0-litre) and diesel (1.5-litre) engines, and you must match the fuel type as well as the engine code. Always confirm the engine code from your V5C with the breaker to make sure you are quoted the correct unit.
Does the gearbox type affect which starter motor I need for my Mazda CX-3?
Yes, gearbox type can affect starter motor fitment on the CX-3 because manual and automatic transmissions can require different starter motors due to differences in the flywheel or driveplate the starter engages with. Make sure you know whether your car has a manual or automatic gearbox before requesting quotes. Provide this alongside your engine code when contacting a breaker to avoid being sent the wrong part.
Does the trim level — SE, SE-L, Sport Nav, or GT Sport — make any difference to which starter motor I need?
No, the trim level makes no difference to starter motor fitment on the CX-3 — trims like SE, SE-L, Sport Nav, and GT Sport share the same engines and the starter motor is a purely mechanical component unaffected by trim or equipment level. What matters is the engine code, fuel type, and gearbox type. You may find cosmetic differences between cars from different trims when collecting the part from a breaker, but these have no bearing on whether the starter motor will fit your vehicle.
Is there a starter motor on all versions of the Mazda CX-3, including automatics and AWD models?
Yes, all Mazda CX-3 variants — whether petrol or diesel, manual or automatic, front-wheel drive or AWD — use a conventional starter motor, so this part exists across the entire model range. However, the specific starter motor required will vary depending on engine code and gearbox type, so these are the key details to establish before sourcing a used unit. Confirm both with the breaker against your registration to ensure compatibility.
Can I use a starter motor from a Mazda 2 or Mazda 6 on my CX-3 if they share the same engine?
If another Mazda model uses the exact same engine code as your CX-3, the starter motor may well be compatible, since the starter motor follows the engine rather than the vehicle it is fitted to. However, ancillary bracket positions and mounting arrangements can vary between different vehicle applications even with a shared engine, so this is not something to assume without checking. Raise this possibility directly with the breaker, who can verify compatibility against both registrations before you commit to buying.