Cheap Mazda 626 Wiper Motor
Need a used Mazda 626 wiper motor? Request a free quote from UK vehicle dismantlers and compare offers direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Choosing the right used Mazda 626 wiper motor
Used wiper motors vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
- State whether it's front or rear
- State hatchback or estate if it's for the rear
Other used Mazda 626 parts
- Used Mazda 626 Central Locking Motor
- Used Mazda 626 Parking Sensor
- Used Mazda 626 Radio
- Used Mazda 626 Ignition Barrel
- Used Mazda 626 ECU
- Used Mazda 626 Oil Pump
- Used Mazda 626 Door Card
- Used Mazda 626 Steering Wheel
- Used Mazda 626 Indicator Light
- Used Mazda 626 Front Panel
- Used Mazda 626 Lambda Sensor
- Used Mazda 626 Axle
Used wiper motor for other Mazda models
Fitment questions
What generation is my Mazda 626 and does the year affect which wiper motor I need?
The Mazda 626 ran across several distinct generations in the UK, with the final two most commonly seen being the GE generation (1991–1997) and the GF generation (1997–2002). The wiper motor design is tied to the generation, so a GE motor and a GF motor are not the same part. When searching, confirm which generation your car belongs to so the breaker can match the correct unit.
Will a wiper motor from a 1995 Mazda 626 fit a 1998 Mazda 626?
These two cars sit in different generations — the 1995 model is GE (1991–1997) and the 1998 model is GF (1997–2002) — which is a known fitment boundary for wiper motors. Parts from either side of that 1997 cut-off are unlikely to interchange, but confirm directly with the breaker against your specific registration before purchasing, as they can verify the exact connector and mounting arrangement.
Does it matter whether I need a front or rear wiper motor on a Mazda 626?
Yes, front and rear wiper motors are entirely different units with different mountings, connectors, and drive mechanisms, so you must specify which one you need when contacting a breaker. The front motor drives the main windscreen linkage, while the rear motor sits in the tailgate and is a much smaller, self-contained unit. Always state front or rear clearly in your quote request to avoid receiving the wrong part.
Does the trim level affect which wiper motor fits — for example, does a GLX motor fit a GLS or an SE?
Trim level does not affect wiper motor fitment on the Mazda 626 — a motor from a GLX will fit an SE or GLS of the same generation without any mechanical issue. The wiper system is the same across the trim range within a generation, so there is no need to match trim when sourcing a used unit. Just confirm the generation (GE or GF) and whether you need front or rear.
Can I use a Mazda 626 wiper motor from a different body style — does it matter?
For the front wiper motor, the key factors are generation and whether the mounting and connector layout match, not the body style as such. That said, if your car has a rear wiper you should confirm with the breaker that the donor car also had a rear wiper fitted, as not all variants were equipped with one. Ask the breaker to check against your registration to ensure the rear motor and its tailgate fitment are compatible.
How do I make sure a used wiper motor from a breaker will actually work on my 626?
Give the breaker your full registration number so they can verify the generation and exact specification of your car before pulling the part. The main things they will check are whether it is front or rear, that the generation matches (GE 1991–1997 or GF 1997–2002), and that the connector and mounting points correspond. A reputable breaker will confirm compatibility before sale, but fitment is ultimately your responsibility to verify.