Cheap Mazda 3 Ignition Switch
Compare prices on a used Mazda 3 ignition switch from UK breakers. Free part request, no obligation.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A buyer's guide to used Mazda 3 ignition switch
No two ignition switchs are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
- State if you need it complete with keys
Other used Mazda 3 parts
Used ignition switch for other Mazda models
Fitment questions
Does the Mazda 3 have an ignition switch, or does it use a start button?
It depends on the generation: the first-generation Mazda 3 (BK, 2003–2009) and second-generation (BL, 2009–2013) used a traditional keyed ignition switch, while the third-generation (BM, 2013–2019) and fourth-generation (BP, 2019–present) increasingly featured keyless push-button start, particularly on higher trim levels. If your Mazda 3 has a key barrel on the steering column, it has a physical ignition switch that can be sourced from a breaker. If it has a push-button start, you will not need an ignition switch — you may be looking for a start button, ignition module, or related component instead.
Will a Mazda 3 ignition switch from a 2007 car fit my 2005 Mazda 3?
Both a 2005 and a 2007 Mazda 3 fall within the first-generation BK (2003–2009), so the ignition switch is likely to be compatible. That said, confirm the part number with the breaker against your registration to be sure, as minor running changes can occur within a generation. Never assume fitment without the breaker checking first.
Can I use a Mazda 3 ignition switch from a 2010 car on my 2012 Mazda 3?
A 2010 and a 2012 Mazda 3 are both within the second-generation BL (2009–2013), so they share the same basic platform and the ignition switch is likely to interchange. Confirm with the breaker using both registrations to rule out any mid-cycle changes. Do not assume fitment without that check.
Will a pre-facelift Mazda 3 ignition switch fit the facelifted BL model?
The second-generation BL Mazda 3 received a facelift around 2011, though the underlying platform and steering column design remained the same. The ignition switch is likely to be the same part across the facelift boundary, but because specific part interchangeability across a facelift is not guaranteed, you should confirm this with the breaker against both registrations before buying.
Does the trim level affect which ignition switch I need — for example, SE versus Sport?
No, the trim level does not affect ignition switch fitment on the Mazda 3 — SE, TS, Sport, and other trim variants all use the same ignition switch for a given generation, provided the car has a keyed ignition rather than push-button start. Trim differences on the Mazda 3 relate to features like alloys, interior equipment, and infotainment, not the ignition switch itself. Just confirm the generation and whether your car has a key barrel with the breaker and you should be fine.
Does the engine size or type matter when sourcing a used Mazda 3 ignition switch?
No, engine size and type do not affect which ignition switch you need — the switch is part of the steering column assembly and is the same across petrol and diesel variants within a generation. Whether your Mazda 3 has a 1.6, 2.0 petrol, or 2.2 diesel engine makes no difference to ignition switch fitment. What matters is the generation (BK or BL) and confirming your car has a traditional keyed ignition, which you should verify with the breaker against your registration.