Cheap Hyundai ix35 Track Rod
Compare prices on a used Hyundai ix35 track rod from UK breakers. Free part request, no obligation.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Buying a used Hyundai ix35 track rod: what matters
Fitment on a used track rod varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
- State whether it's left or right
Other used Hyundai ix35 parts
- Used Hyundai ix35 Subframe
- Used Hyundai ix35 Steering Rack
- Used Hyundai ix35 Brake Pedal
- Used Hyundai ix35 Wishbone
- Used Hyundai ix35 Indicator Stalk
- Used Hyundai ix35 Wheel Trims
- Used Hyundai ix35 Seat Belt Pretensioner
- Used Hyundai ix35 Fog Light
- Used Hyundai ix35 Fuel Injection Pump
- Used Hyundai ix35 Steering Box
- Used Hyundai ix35 Bonnet
- Used Hyundai ix35 Radio
Used track rod for other Hyundai models
Fitment questions
Does a track rod from an earlier Hyundai ix35 fit a later one – and does the 2010–2015 facelift change anything?
The Hyundai ix35 ran as a single generation from 2010 to 2015, with a facelift arriving around 2013 that brought cosmetic changes but did not alter the steering geometry or track rod design. In most cases a pre-facelift and post-facelift track rod will interchange, but because mid-generation running-gear revisions can sometimes occur quietly, you should confirm the specific part number against your registration with the breaker before buying.
Will a track rod from a 2WD ix35 fit my 4WD ix35?
Both the front-wheel-drive and four-wheel-drive versions of the ix35 use the same basic front steering setup, so the track rod design is generally shared across drivetrain layouts. That said, any difference in front subframe or suspension geometry between 2WD and 4WD variants is worth raising with the breaker – give them your full registration to double-check the part number matches.
Does engine size matter when sourcing a used ix35 track rod – will a 1.6 part fit a 2.0?
Track rods are part of the steering linkage rather than the braking or drivetrain system, and on the ix35 engine size does not typically alter the track rod specification. You should still quote your exact engine size to the breaker when requesting a quote, as it helps them cross-reference the correct part number and rule out any edge-case variance.
Does trim level affect which track rod I need – for example, does a Classic or Premium spec ix35 use a different part?
Trim level does not affect track rod fitment on the ix35 – parts fitted to a Classic, Comfort, Premium, or Style trim are the same steering components. The only differences between trims are cosmetic things like alloy wheels, interior finish, and equipment levels, none of which alter the steering geometry or the track rod itself.
Do I need to specify nearside or offside when ordering a used ix35 track rod?
Yes – track rods are side-specific, so you must tell the breaker whether you need the nearside (NS, left-hand side as you sit in the car) or offside (OS, right-hand side) track rod. Getting this wrong means the part will not align correctly, so double-check which side needs replacing before contacting a breaker for a quote.
Is a track rod actually fitted to the Hyundai ix35, and can I find one from a breaker?
Yes, the Hyundai ix35 is a front-wheel-drive or four-wheel-drive vehicle with conventional rack-and-pinion steering, so track rods (also called tie rods) are a genuine and standard fitment on this model. They are a commonly replaced steering component and used examples are regularly available through UK breakers – supply your registration and specify the side you need to get an accurate quote.