Used Hyundai Accent Sun Visor

No — the Hyundai Accent ran across several distinct generations (the LC generation ran roughly 2000–2006, the MC from 2006–2011, and the RB from 2011 onwards), and sun visors are interior parts that are shaped and clipped to match each generation's headliner and roof structure, so they are not interchangeable between generations. Always tell the breaker your exact year and registration so they can match the correct generation. Buying from the wrong generation is a very common mistake with interior trim parts.

This is a generation boundary question — the LC generation ended around 2006 and the MC generation began around 2006–2007, so a 2005 visor and a 2007 visor may well be from different generations with different fixings and headliner profiles. You should confirm with the breaker whether the donor car's exact year and trim puts it in the same generation as yours before buying. Do not assume fitment just because the model name is the same.

For the Hyundai Accent, sun visor fitment is primarily driven by generation and whether the visor includes a vanity mirror or illuminated mirror, which can vary by trim level. If your car has an illuminated vanity mirror on the visor, make sure the replacement also has that feature and that the wiring is present, as a basic visor from a lower trim will fit physically but will lack the light. Confirm with the breaker what trim the donor car was to avoid ending up with a cosmetically different unit.

Yes, the side matters — the nearside (NS, passenger side) and offside (OS, driver's side) sun visors are handed parts, shaped and hinged for their respective sides, and they are not interchangeable. When contacting a breaker, always specify whether you need the NS or OS visor. Getting the side wrong means the visor will not sit or pivot correctly.

No — the engine has no bearing on sun visor fitment whatsoever, as this is a pure interior trim part. What matters is the generation of your Accent, the trim level (which affects whether the visor has a vanity mirror or illuminated mirror), and which side you need. You do not need to mention your engine to the breaker when sourcing this part.

Sun visor replacement is generally a straightforward job involving removing a retaining clip or screw and unplugging any wiring for an illuminated mirror — most reasonably competent DIYers can manage it. However, if your visor is mounted close to a curtain airbag or A-pillar trim that conceals airbag components, take care not to disturb those systems, and if in any doubt have a professional carry out the work. Always check the replacement unit matches your existing setup before fitting.