Second Hand Ford Ka Seat Belt Pretensioner
Get quotes for a used or replacement Ford Ka seat belt pretensioner. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Choosing the right used Ford Ka seat belt pretensioner
Used seat belt pretensioners vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
- State whether it's front or rear, left or right
Other used Ford Ka parts
- Used Ford Ka Centre Console
- Used Ford Ka Rear View Mirror
- Used Ford Ka Glove Box
- Used Ford Ka Heater Matrix
- Used Ford Ka Rear Panel
- Used Ford Ka Steering Box
- Used Ford Ka Gearbox Mount
- Used Ford Ka Bulkhead
- Used Ford Ka Fuel Injector
- Used Ford Ka Engine Wiring Loom
- Used Ford Ka Clutch
- Used Ford Ka Airbag Control Module
Used seat belt pretensioner for other Ford models
Fitment questions
Do Ford Ka seat belts even have pretensioners?
Yes, the Ford Ka was fitted with seat belt pretensioners as standard across its production run — these are the pyrotechnic devices built into the belt mechanism that snap the belt tight in a collision to restrain the occupant before the airbag deploys. They are present on both front seats and are part of the car's SRS (Supplemental Restraint System). Like airbags, pretensioners are single-use safety devices: once fired in a crash, they must be replaced before the car is roadworthy again.
Will a seat belt pretensioner from a 2005 Ka fit my 2009 Ka?
The Ford Ka ran as a single generation (Mk1) from 1996 through to 2008, with a facelift around 2003, before the all-new Mk2 (built on a Fiat 500 platform) launched for 2009. A 2005 Ka is Mk1 and a 2009 Ka is Mk2 — these are fundamentally different cars, so the pretensioners are not interchangeable. Always confirm exact part compatibility with the breaker using your registration number.
Does it matter which side I order — nearside or offside?
Yes, seat belt pretensioners are side-specific: the nearside (NS) unit fits the passenger side and the offside (OS) unit fits the driver's side, and they are not interchangeable. When contacting a breaker, make sure you specify clearly whether you need the NS or OS pretensioner. Double-check this against your own vehicle before ordering to avoid a wasted trip.
Does the trim level affect which pretensioner I need — for example, does a Studio Ka use the same part as an Zetec Ka?
On the Mk2 Ka (2009–2016), trim levels such as Studio, Style, and Zetec did not involve fundamentally different seat belt pretensioner mechanisms, though seat and interior configurations can vary by trim. The safest approach is to confirm the exact part number with the breaker against your registration, as pretensioner variants across trim levels is one of those details that breakers are best placed to verify. Never assume fitment is identical without checking.
Can I fit a seat belt pretensioner myself, or does it need a garage?
Seat belt pretensioners are classified as safety-critical components and contain a small explosive charge, so professional fitting by a trained technician is strongly recommended — this is not a DIY job. Incorrect installation could result in the pretensioner failing to deploy in a crash, or deploying unexpectedly during fitting, both of which are extremely dangerous. A garage will also need to check and potentially reset the SRS warning light after the repair.
Will a pretensioner from a pre-facelift Mk2 Ka fit a post-facelift model?
The Mk2 Ka received a facelift around 2012, and while the basic platform remained the same, whether pretensioner parts interchange across that boundary is something you should confirm with the breaker against your specific registration rather than assume. Name the year of both the donor car and your own vehicle when requesting a quote, as breakers can cross-reference part numbers to verify compatibility. Never fit a safety-critical SRS component without confirming it is the correct part for your exact car.