Cheap Ford Edge Bonnet Strut

Yes, the Ford Edge uses gas-filled bonnet struts (also called bonnet lifters or bonnet supports) rather than a manual prop rod, so this is a genuine part for the vehicle. There is one strut on each side of the engine bay, and either or both can fail over time, causing the bonnet to drop or feel heavy to open. When searching with a breaker, it is worth specifying whether you need the nearside (NS) or offside (OS) strut, or a pair.

The Ford Edge sold in the UK came in one main generation spanning roughly 2016 to 2020 (the second-generation Edge, based on the CD4 platform), so a 2015 UK-market Edge is unlikely — if you have a 2015 vehicle it may be a US or European grey import from the first generation, which used different parts. If both vehicles are the same second-generation UK model, the struts are likely to be compatible, but you should confirm the exact part number with the breaker against your registration before buying. Do not assume compatibility across generations.

The second-generation UK Ford Edge received a mid-cycle refresh around 2018–2019 that updated the front-end styling including the grille, bumper, and lights. Bonnet struts are mechanically attached to the bonnet and body structure rather than being part of the cosmetic front-end trim, so the facelift is unlikely to have changed the strut itself. That said, if the bonnet panel was revised in shape at the facelift boundary, the strut geometry could differ, so it is worth confirming with the breaker against your registration number to be safe.

Trim level does not affect bonnet strut fitment on the Ford Edge — the struts are the same across all trim grades including Titanium and any lower or higher specification variants. The bonnet structure and hinge points are shared regardless of what badges, equipment, or interior spec the vehicle carries. You may find that bonnets pulled from different trim levels look slightly different cosmetically, but the strut itself is interchangeable across trims within the same generation.

Engine choice does not affect bonnet strut fitment on the Ford Edge — the struts are the same whether the donor car had the 2.0-litre diesel or any other engine offered in the generation. The bonnet and its support hardware are shared across the engine range because the engine bay dimensions and bonnet hinge points do not change between variants. Focus your search on matching the generation and confirming the part against your registration with the breaker rather than worrying about engine codes.

The main things to check are that the strut comes from the same generation Edge as your car and that the breaker can verify it against your registration plate. Used gas struts can lose pressure over time even in storage, so ask the breaker how long the part has been off the donor vehicle and whether they can confirm it holds its extended position. A good breaker will be able to pull the part number from their system and cross-reference it to give you confidence before you buy.