Used Audi A2 Bulkhead
Get quotes for a used or replacement Audi A2 bulkhead. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Other used Audi A2 parts
Used bulkhead for other Audi models
Fitment questions
What years does the Audi A2 cover and are all bulkheads the same?
The Audi A2 was produced as a single generation from 1999 to 2005 with no major structural facelift, so it ran on one platform throughout its production life. Because the bodyshell and bulkhead pressing remained consistent across the full run, a bulkhead from any year in that 1999–2005 window should correspond to the same structure. That said, always confirm the exact part against your registration with the breaker before purchasing.
Will a bulkhead from a 2001 A2 fit my 2004 A2?
Both the 2001 and 2004 A2 sit within the same single 1999–2005 generation with no known mid-generation structural revision to the bulkhead, so they are generally considered the same. However, mid-generation pressing changes are always possible and we cannot rule them out, so confirm the specific part matches your car's registration with the breaker before committing.
Does the engine size or spec affect which bulkhead I need for my A2?
No — engine choice, whether 1.4 petrol, 1.4 TDI, or 1.6 FSI, has no bearing on the bulkhead, as this is a structural body panel tied to the platform rather than the drivetrain. Any differences you might notice between cars at the breaker will be cosmetic or wear-related, not dimensional. Buy on the body structure, not the engine bay spec.
Does the trim level matter — will a bulkhead from a base-spec A2 fit my higher-spec model?
Trim level does not affect bulkhead fitment on the A2 — the structure is the same regardless of whether the donor car was a lower or higher specification. You may find cosmetic differences such as seam-sealer application or minor bracket positions that vary between individual build dates rather than trim grades. Confirm any bracket or mounting detail with the breaker against your registration to be sure.
The A2 looks similar to some other small Audis — will a bulkhead from a different model cross over?
The A2 uses its own unique aluminium spaceframe platform, which is not shared with the A3, A4, or any other Audi model of the period, so bulkheads from other Audi ranges will not fit. You need a bulkhead sourced specifically from a 1999–2005 Audi A2. Your breaker should be able to cross-reference by platform to confirm the correct match.
Is there anything else I need to tell the breaker when asking about an A2 bulkhead?
Give the breaker your full registration number so they can verify the exact build date and any production-run variation. Because the A2 is relatively rare and uses an aluminium body structure, availability may be limited and condition of the metal is worth asking about specifically. Confirming the car the part is coming from has not had accident damage to the bulkhead area is also worthwhile given how critical this panel is to the vehicle's structure.
Fitment guidance is general and mistakes can happen - vehicle specifications vary and manufacturers make mid-production changes. Always confirm the exact part against your registration with the supplying breaker before buying.