Alfa Romeo 4C Windscreen Replacement Parts

The Alfa Romeo 4C was produced as a single generation from 2013 to 2020, so all cars share the same basic body shell and windscreen aperture. That said, you must check whether the screen has mounting provisions for an ADAS camera bracket, as later cars were more likely to be fitted with forward-facing camera systems, and a screen without the correct bracket won't support your car's safety features. Always confirm with the breaker that the screen matches your car's specification by providing your registration.

The 4C ran as a single generation throughout its life from 2013 to 2020 with no major platform change, so the screen opening is consistent across those years. However, whether a screen from a 2013–2014 car will correctly interchange with a later one depends on whether your car has an ADAS camera bracket or heating elements that the earlier screen may lack — crossing that technology gap is where fitment can go wrong. Check with the breaker against your registration before buying.

The 4C Coupe and 4C Spider are different body styles, and the Spider's windscreen and screen surround are specific to the open-top body rather than shared with the Coupe, so they are not interchangeable. When asking a breaker for a screen, make sure you specify whether your car is the Coupe or the Spider so they can source the right part.

Trim level makes no difference to windscreen fitment on the 4C — what matters is whether your screen needs an ADAS camera bracket and whether it has heating elements, not what spec or edition the car is badged as. You may find cosmetic differences between screens from different cars, such as slight tint variation, but these don't affect whether the glass fits. Focus your questions to the breaker on camera brackets and heating rather than trim name.

If your 4C has a forward-facing camera mounted near the top of the windscreen — typically used for lane-keeping or automatic emergency braking — then you need a screen with the correct bracket moulded or bonded into the glass. Fitting a screen without the bracket, or with a bracket in a slightly different position, can prevent the camera from being recalibrated correctly. Confirm the exact bracket configuration with the breaker using your registration, as compatibility with your specific ADAS system is something only they can verify against the part in hand.

Yes, this is worth checking — if your car has a heated windscreen, the replacement needs to have the same heating elements built into the glass, otherwise the heating function simply won't work when connected. A heated screen fitted in place of an unheated one is usually harmless but means you'd be paying extra for a feature you can't use. Ask the breaker to confirm whether the screen is heated or unheated before purchasing.