Findapart

Cheap Volkswagen T-Cross CV Joints

Get quotes for a used or replacement Volkswagen T-Cross cv joints. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

A buyer's guide to used Volkswagen T-Cross cv joints

No two cv jointss are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:

Other used Volkswagen T-Cross parts

Used cv joints for other Volkswagen models

Fitment questions

Does the Volkswagen T-Cross have CV joints?

Yes, all Volkswagen T-Cross models have CV joints - they are a standard part of any front-wheel-drive drivetrain, transferring drive from the gearbox to the front wheels while allowing the suspension and steering to move. The T-Cross is a front-wheel-drive only model in the UK market, so every variant, regardless of engine or trim, will have CV joints on both the nearside (NS) and offside (OS) front driveshafts. If you are sourcing a used CV joint from a breaker, make sure to specify which side you need.

Will a CV joint from a 2019 T-Cross fit a 2022 T-Cross - does the facelift make a difference?

The Volkswagen T-Cross launched in 2019 and received a facelift in 2021, which refreshed styling and some interior features but did not fundamentally change the front drivetrain layout. CV joints are part of the running gear rather than the cosmetic or trim updates that facelifts typically affect, so there is a reasonable chance of crossover between pre- and post-facelift cars. However, because driveshaft and CV joint dimensions can vary with engine size, you should confirm compatibility against your exact registration with the breaker before purchasing.

Does engine size affect which CV joint I need for my T-Cross?

Larger or higher-torque engines can require more heavily built driveshafts and CV joints to handle the additional power, so a CV joint from a 1.0-litre T-Cross is not guaranteed to be identical to one from a 1.5-litre car. When contacting a breaker, always quote your exact engine size and ideally your VIN or registration so they can match the correct part. Do not assume all T-Cross CV joints are interchangeable across engine variants.

Does trim level affect which CV joint fits my T-Cross - for example, will a part from an SE fit my Style?

Trim level does not affect CV joint fitment on the T-Cross - whether your car is a base S, SE, Style, or R-Line, the CV joints are determined by the drivetrain and engine rather than the trim specification. A CV joint from an SE donor car with the same engine size should be the same unit as on a Style or R-Line of the same engine. The only differences between trim levels relevant to a used part purchase are cosmetic, which have no bearing on running gear like CV joints.

How do I know if I need the nearside or offside CV joint on my T-Cross?

On a front-wheel-drive car like the T-Cross, the nearside (NS) CV joint is on the left as you sit in the driver's seat, and the offside (OS) is on the right. The two sides are not always identical - the driveshafts can differ in length depending on the gearbox layout, so it is important to tell your breaker which side you need. If you are unsure, your garage or a quick look under the car at which shaft or gaiter is damaged will confirm it before you get quotes.

I have a 2020 T-Cross 1.0 TSI - can I use a CV joint from a 2023 T-Cross of the same engine?

The 2023 T-Cross sits within the post-2021 facelifted generation, while a 2020 car is pre-facelift, but both use the same basic MQB A0 platform and the 1.0 TSI engine family. Matching engine size is the most important factor for CV joint compatibility, and the same platform across both generations is a good sign. That said, you should confirm the specific part numbers match with the breaker against your registration before committing, as minor production changes can sometimes affect driveshaft specifications.