Compare prices on a used Volkswagen Sharan fuel filter from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used fuel filters vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
The Sharan ran across two main generations: the Mk1 (1995–2010, with a facelift around 2000) and the Mk2 (2010 onwards), and these are entirely different platforms, so filters do not cross between them. Within each generation, the engine code is the key factor — a filter from a matching engine code is far more likely to interchange than one simply from the same year. Confirm any cross-year fitment with the breaker against your exact registration and engine code before ordering.
Yes, the Sharan does have a fuel filter, but its location and serviceable nature differ by fuel type. Diesel variants — including the common 1.9 TDI and 2.0 TDI engines — have an external, serviceable fuel filter that is a recognised replacement part. Petrol variants typically have the fuel filter integrated within the fuel pump assembly inside the tank, meaning it is rarely replaced as a separate part and you are unlikely to find it sold individually by a breaker.
These are different engine families with different fuel system specifications, so the filters are generally not the same part even though both are diesels. The engine code — found on your V5 or via a VIN check — is the most reliable way to identify the correct filter, as there were several variants of both the 1.9 TDI and 2.0 TDI fitted to the Sharan across the Mk1 and Mk2 generations. Give the breaker your engine code and registration to confirm the right match.
The 2008 car is a late Mk1 and the 2012 car is an early Mk2 — these are different generations built on different platforms, so the fuel filters are not interchangeable. Even within the Mk2 (2010 onwards), you should match by engine code rather than year alone, as specification can vary. A breaker will cross-reference your registration and engine code to make sure the filter they supply is correct for your exact vehicle.
No, trim level has no bearing on the fuel filter — S, SE, and SEL Sharans fitted with the same engine will use the same filter. The fuel system follows the engine, not the badge or specification level. Focus on supplying the breaker with your engine code and fuel type rather than your trim designation.
The exact engine code matters, because the Mk2 Sharan was offered with several 2.0 TDI variants carrying different engine codes, and the fuel filter specification can differ between them. The engine code is stamped on the engine block and is also listed on your V5 or available through a VIN check. Pass that code to the breaker alongside your registration so they can confirm the filter they have is the correct one for your car.