Volkswagen Fox Airbag Control Module Replacement Parts

Yes, the Volkswagen Fox was fitted with an airbag system including an airbag control module (also called an SRS control unit) as standard across its production run in the UK market. The module manages the airbag deployment signals and is located in the cabin, typically under or near the centre console. If yours has been triggered in an accident, bear in mind the module is single-use after deployment and will need replacing rather than resetting in most cases. Always confirm the exact unit against your registration with the breaker before buying.

The UK-market Volkswagen Fox was sold as a single generation, running from approximately 2005 to 2011, so there is no separate earlier or later generation to worry about. In broad terms, modules from within this production run are more likely to be compatible with one another than modules from a different model entirely, but the specific SRS system variant and any mid-run changes to the module specification must be confirmed with the breaker against your exact registration. Do not assume any Fox-to-Fox swap is guaranteed without that check. This is a safety-critical part, so professional fitting and verification are strongly recommended.

The Volkswagen Fox was available in trim levels including Base and the higher Urban Fox specification, and while trim level can influence interior equipment, the airbag control module fitment is primarily determined by the vehicle generation rather than trim. That said, any variation in the SRS system specification between trim levels should be confirmed with the breaker against your registration, as this is a safety-critical component where an incorrect match carries real risk. A breaker will be able to cross-reference the part number from your VIN to make sure you get the right unit.

The airbag control module itself is a central unit managing the whole SRS system, so door count is less likely to be the deciding factor compared to generation and any variant-specific SRS configuration. However, if your vehicle has side curtain airbags or door-mounted airbags whose configuration differs between body styles, this could affect module compatibility, and you should confirm this detail with the breaker. As always with airbag components, professional fitting is strongly advised.

Airbag control modules are safety-critical components and we strongly recommend professional fitting by a qualified technician rather than DIY installation. Incorrect fitting or coding can result in airbags not deploying in a collision, or deploying unexpectedly, both of which are extremely dangerous. The module typically also needs to be electronically coded to the vehicle using diagnostic equipment, which is not something most home mechanics will have access to. Always have this work carried out by a garage or auto electrician experienced with SRS systems.

The most reliable way is to provide the breaker with your full registration number and ideally the part number from your existing module, so they can match it directly rather than relying on year or trim alone. Ask the breaker to confirm the module has not previously been deployed, as a triggered module is single-use and cannot legally or safely be reused. Because SRS system variants and pretensioner configurations are things we recommend confirming with the breaker rather than assuming, this conversation with them before purchase is essential, not optional.