Cheap Volkswagen Crafter Windscreen

The Crafter comes in two generations: the first generation ran from 2006 to 2017, and the second generation runs from 2017 onwards. Windscreens are generally interchangeable within each generation, but you should not assume a first-gen screen will fit a second-gen van or vice versa, as the body shape changed significantly. Always quote your registration to the breaker so they can confirm the correct generation.

Almost certainly not — the 2015 van is a first-generation Crafter (2006–2017), while the 2019 is a second-generation model (2017 onwards), and the two generations have different body shapes and screen apertures. This is exactly the kind of cross-generation boundary where fitment breaks down, so confirm with the breaker against your registration before purchasing. Never assume a screen from either side of the 2017 changeover will cross over.

Yes, this is one of the most important things to check on newer Crafters. Second-generation models (2017 onwards) are increasingly fitted with ADAS systems — lane assist, automatic emergency braking and similar — which require a bracket behind the windscreen to mount a forward-facing camera. Fitting a screen without the correct bracket, or one with a bracket in the wrong position, can render those safety systems inoperable. Confirm with the breaker whether the screen they have matches your van's ADAS setup, quoting your registration.

Yes — a heated windscreen has an electrical element built into the glass, and if your van is wired for a heated screen, you need a replacement that also has heating elements; a plain screen simply will not connect. Equally, fitting a heated screen to a van not wired for one is wasteful and unnecessary. Check your current screen and dashboard controls, then confirm the type with the breaker before agreeing a price.

Trim level makes no difference to windscreen fitment on the Crafter. Whether your van is a Startline, Trendline, or Highline, the screen aperture is the same, so a used screen from any of those trims will physically fit. What does matter is the generation (first-gen 2006–2017 or second-gen 2017 onwards), and whether the screen has heating elements or an ADAS camera bracket — those features vary by specification, not by trim name.

The glass itself is often the same across left- and right-hand-drive Crafters, since the screen spans the full width of the cab symmetrically. However, if the screen has an ADAS camera bracket, the position of that bracket may differ between LHD and RHD vehicles. Confirm with the breaker against your registration whether the specific screen they have will work correctly with your van's camera or rain sensor setup.