Used Vauxhall Corsa Suspension Leg
Get quotes for a used or replacement Vauxhall Corsa suspension leg. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A buyer's guide to used Vauxhall Corsa suspension leg
No two suspension legs are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
- State whether it's front or rear, left or right
Other used Vauxhall Corsa parts
- Used Vauxhall Corsa Tyre
- Used Vauxhall Corsa Brake Pads
- Used Vauxhall Corsa Shock Absorber
- Used Vauxhall Corsa Brake
- Used Vauxhall Corsa Timing Chain
- Used Vauxhall Corsa Transfer Box
- Used Vauxhall Corsa Dual Mass Flywheel
- Used Vauxhall Corsa Bulkhead
- Used Vauxhall Corsa Axle
- Used Vauxhall Corsa Water Pump
- Used Vauxhall Corsa Intercooler
- Used Vauxhall Corsa Brake Discs
Used suspension leg for other Vauxhall models
Fitment questions
What generation of Vauxhall Corsa does my suspension leg need to match?
The Corsa has gone through several distinct generations in the UK: the B (1993–2000), C (2000–2006), D (2006–2014), E (2014–2019), and F (2019–present), and suspension legs are not interchangeable between these generations as the strut geometry, mounting points, and dimensions differ significantly. Always make sure you and the breaker are working from the same generation, which you can confirm from your registration plate. Stating your reg to the breaker is the safest way to ensure they pull the correct unit.
Will a suspension leg from a 2012 Corsa fit my 2015 Corsa?
These fall in different generations — the 2012 car is a Corsa D (2006–2014) and the 2015 car is a Corsa E (2014–2019) — and suspension legs do not cross that generational boundary due to changes in strut design and mounting. You must source a suspension leg from the correct generation for your car. Confirm the generation with the breaker using your registration to be certain.
Does engine size affect which suspension leg I need on a Vauxhall Corsa?
Engine size can influence the suspension specification on the Corsa, as heavier or more powerful variants may have been fitted with uprated struts from the factory. Within the same generation, a 1.0 or 1.2 petrol car may share components with a 1.4, but higher-output engines or performance derivatives could differ. Give the breaker your engine size alongside your reg so they can check the correct part applies to your specific car.
Does the trim level affect which suspension leg fits — for example, does an SE need a different one to an SRi or VXR?
Trim level alone does not determine which suspension leg fits — a Corsa SE and a standard SRi of the same generation will generally use the same strut assembly. However, performance variants like the VXR may carry different spring or damper rates, and sport suspension options could also differ; these specifics are best confirmed with the breaker against your registration rather than assumed from trim name alone. The breaker can check whether the unit they have matches your car's original specification.
Does it matter which side — nearside or offside — I specify when buying a used Corsa suspension leg?
Yes, this matters — nearside (NS, passenger side in the UK) and offside (OS, driver side) suspension legs are handed and are not interchangeable. Always specify the correct side when contacting a breaker, as fitting the wrong side will affect geometry and could make the car unsafe to drive. Double-check which side you need before placing your order.
Do Corsa D suspension legs from before and after the 2011 facelift interchange?
The Corsa D ran from 2006 to 2014 with a facelift in 2011, and while the basic platform remained the same, whether suspension legs cross that facelift boundary without issue is something you should confirm with the breaker against your specific registration rather than assume. The breaker will be able to check the part numbers against your reg to confirm compatibility. Do not assume a pre-facelift strut is a guaranteed fit on a post-facelift car without that check.