Findapart

Second Hand Škoda Roomster Coil Pack

Compare prices on a used Škoda Roomster coil pack from UK breakers. Free part request, no obligation.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

What to check when buying a used Škoda Roomster coil pack

A used coil pack that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:

Other used Škoda Roomster parts

Used coil pack for other Škoda models

Fitment questions

Does the Škoda Roomster actually have a coil pack?

It depends on the engine: the Roomster's petrol engines use a coil pack ignition system, so if you have a petrol-engined Roomster you will need one. The diesel engines (TDI variants) use a compression-ignition system with no spark plugs and therefore no coil pack at all. If you have a diesel Roomster and are chasing an ignition-related fault, you are more likely looking for a glow plug or glow plug control module instead.

Which Roomster petrol engines have a coil pack and what are the engine codes?

The Roomster ran petrol engines including the 1.2 HTP (engine codes AZQ and BME), the 1.4 MPI (codes BXW and similar), and the 1.6 MPI (code BSE/BSF), all of which use individual or combined coil pack arrangements. The most important thing you can do before ordering is find your exact engine code from your V5C or a VIN check, because coil pack design varies between these codes even though the cubic capacity sounds the same. Supply that engine code to the breaker rather than just the engine size.

The Roomster ran from 2006 to 2015 — will a coil pack from an early 2006-2010 car fit my 2011-2015 facelift model?

The Roomster was produced from 2006 and received a facelift around 2010-2011, but for mechanical parts like the coil pack it is the engine code that determines compatibility, not whether the car is pre- or post-facelift. If your donor car and your car share the same engine code, fitment is very likely, but you should confirm this directly with the breaker against your registration because ancillary mounting details can change mid-production without a full model revision.

Does the trim level affect which coil pack I need — for example, does a Roomster Scout need a different one to a standard Roomster?

No, trim level makes no difference to coil pack fitment whatsoever; the coil pack follows the engine, not the badge or equipment level. A Roomster Scout with a 1.4 petrol and a standard Roomster with the same engine code will take the same coil pack. Trim differences on the Roomster are about cosmetics and interior equipment, none of which affects ignition components.

How many coils does a Roomster coil pack have — is it one unit or separate coils per cylinder?

This depends on the specific engine: the 1.2 three-cylinder petrol engines typically use a single combined coil pack unit covering all three cylinders, while four-cylinder 1.4 and 1.6 engines may use a four-tower coil pack or individual coil-on-plug units. When sourcing a used part, tell the breaker your engine code so they can match the correct configuration, as mixing up a three-cylinder unit with a four-cylinder one is a common ordering mistake.

Can I use a coil pack from a VW or SEAT with the same engine code in my Roomster?

The Roomster shares its engine family with other VAG group vehicles such as the VW Polo, SEAT Ibiza, and SEAT Altea of the same era, and where the engine code is identical the coil pack is often the same part. This can make sourcing easier as there are more donor vehicles available, but you should still confirm the match with the breaker against both registration numbers before buying, as small production changes can affect ancillary fitment even within the same engine family.