Findapart

Škoda Rapid Ignition Switch Replacement Parts

Get quotes for a used or replacement Škoda Rapid ignition switch. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Buying a used Škoda Rapid ignition switch: what matters

Fitment on a used ignition switch varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:

Other used Škoda Rapid parts

Used ignition switch for other Škoda models

Fitment questions

Does the Škoda Rapid actually have an ignition switch, or does it use a push-button start?

The Škoda Rapid (2012–2019) uses a traditional keyed ignition barrel and switch rather than a push-button start system, so a physical ignition switch does exist on this model across its full production run. All standard UK variants came with the conventional key-and-barrel setup, meaning the part is relevant whichever engine or trim you have.

Will an ignition switch from a 2013 Škoda Rapid fit a 2016 Rapid?

The Škoda Rapid ran as a single generation from 2012 to 2019, with a facelift in 2017, and the ignition switch assembly is typically one of the components that can cross that facelift boundary — however, because connector and barrel coding can vary between production years, you should confirm compatibility with the breaker against your exact registration before buying. The breaker can check the part number from their donor vehicle against yours to be sure.

Does the ignition switch differ between Rapid trim levels — S, SE, and Elegance?

Trim level does not affect ignition switch fitment on the Škoda Rapid — the S, SE, and Elegance trims all use the same basic ignition switch assembly. You may find cosmetic differences in the surrounding trim or the key fob style depending on spec, but the switch itself is not trim-specific.

Can I use an ignition switch from a Škoda Rapid Spaceback on my standard Rapid?

The Rapid Spaceback (the estate-bodied variant sold alongside the fastback Rapid) shares the same platform and electrical architecture, so the ignition switch is generally the same part. That said, always confirm the part number with the breaker against both registrations, as minor running changes can occur across the production run.

Does the engine variant — petrol or diesel — affect which ignition switch I need for a Škoda Rapid?

Engine type does not affect ignition switch fitment on the Škoda Rapid — the switch operates the same way regardless of whether your car is a petrol or diesel. This means a switch pulled from a 1.2 TSI petrol car at a breaker should be the same unit as one from a 1.6 TDI diesel, though confirming part numbers with the breaker is always good practice.

What should I check when buying a used ignition switch for a Škoda Rapid from a breaker?

Ask the breaker to confirm the part number from their donor vehicle matches yours, and check whether the switch comes with the barrel and key — some breakers supply the switch unit only, which means you would need to have it re-coded or swap barrels to avoid affecting your immobiliser. If the car has been remapped or had any security work done, it is worth mentioning this to the breaker so they can advise accordingly.