Compare prices on a used Škoda Felicia ignition barrel from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used ignition barrels vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
The Škoda Felicia was produced from 1994 to 2001 as a single generation with a facelift introduced in 1998, and the ignition barrel is a standard fitment across all variants throughout that run. Parts from the pre-facelift years (1994–1997) may differ from post-facelift examples (1998–2001), so confirm with the breaker whether the barrel you're being quoted is from the correct phase of production for your car. Always quote your registration when requesting a part so the breaker can match it accurately.
A 1997 Felicia is pre-facelift and a 1999 is post-facelift, and this boundary (the 1998 refresh) can affect the ignition barrel design and the way it integrates with the steering column lock. You should not assume they are interchangeable — route this question to the breaker and give them both the donor and recipient registration numbers so they can verify the exact part numbers. A breaker experienced with Felicias will be able to tell you quickly whether the two barrel assemblies are compatible.
For most mechanical and electrical fitment purposes the ignition barrel on the Felicia is not engine-specific — the same barrel design was used across the petrol and diesel variants. Where differences can arise is in the number of electrical positions or ancillary connections if the car has options like a factory immobiliser, so confirm with the breaker that any barrel they supply matches your car's ignition switch wiring. Quoting your registration gives the breaker the best chance of sourcing the right unit first time.
Trim level does not affect ignition barrel fitment on the Felicia — a barrel from an entry-level car will physically fit a higher-spec model and vice versa. The one thing worth noting is that higher-spec Felicias may have had an immobiliser system that interacts with the barrel, so if your car has an immobiliser you need to make sure the donor car did too, or be prepared for additional coding work. Otherwise trim is not a concern when sourcing this part.
The Felicia was sold in several body styles in the UK including the hatchback, estate, and the Fun (a small pick-up/open-body variant), and while the underlying platform is shared, you should confirm with the breaker whether the ignition barrel from a different body style is identical to yours. In many cases they will be the same unit, but differences in steering column assembly across body styles can occasionally affect compatibility. Give the breaker both registrations and let them cross-reference the part numbers to be sure.
Replacing a Felicia ignition barrel is a reasonably straightforward job for an experienced mechanic, typically involving removal of the steering column shroud and release of the barrel retaining pin or clip. When buying used, check with the breaker whether the barrel comes with its original key, as a matched key can save you significant hassle; if it does not, a locksmith or auto electrician will need to cut and code a replacement. Also confirm whether your car has a factory immobiliser and whether the donor car matched, as a mismatch can cause a no-start condition even with a correctly fitted barrel.