Cheap Peugeot 408 Brake Master Cylinder
Compare prices on a used Peugeot 408 brake master cylinder from UK breakers. Free part request, no obligation.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A buyer's guide to used Peugeot 408 brake master cylinder
No two brake master cylinders are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
- State if ABS is fitted
Other used Peugeot 408 parts
- Used Peugeot 408 Wishbone
- Used Peugeot 408 Tyre
- Used Peugeot 408 Steering Box
- Used Peugeot 408 Subframe
- Used Peugeot 408 Fuel Pump
- Used Peugeot 408 Horn
- Used Peugeot 408 Timing Chain
- Used Peugeot 408 Radiator
- Used Peugeot 408 Rear Bumper
- Used Peugeot 408 Central Locking Motor
- Used Peugeot 408 Front Panel
- Used Peugeot 408 EGR Valve
Used brake master cylinder for other Peugeot models
Fitment questions
Does a Peugeot 408 actually have a brake master cylinder?
Yes, the Peugeot 408 has a conventional hydraulic braking system and is fitted with a brake master cylinder as standard across all variants. This is a normal fitment on this model regardless of engine size or trim level.
Will a brake master cylinder from an earlier 408 (2022-2023) fit the facelifted 2024 model?
The Peugeot 408 launched in 2022 as a single generation, but it is worth establishing whether any mid-cycle brake system changes were introduced on later 2024 cars before assuming parts interchange - confirm this with the breaker against your exact registration number. Engine size may also be a factor, as larger or more powerful variants can carry a differently rated master cylinder. Never assume a part fits without the breaker checking your specific vehicle.
Does engine size affect which brake master cylinder I need for my Peugeot 408?
Yes, engine size and power output can influence the brake system specification, so the master cylinder from a 1.2-litre PureTech 130 may not be the same unit as the one on the 1.6-litre PureTech 180 or the plug-in hybrid variants. When requesting a quote, always tell the breaker your exact engine size and whether your car is the PHEV, as these differences matter for fitment. Do not assume all 408 master cylinders are interchangeable across the engine range.
Does trim level affect which brake master cylinder I need - for example, Allure versus GT?
Trim level alone does not affect brake master cylinder fitment on the Peugeot 408 - the Allure and GT share the same underlying braking architecture for a given engine. What matters is your engine size and drivetrain type, not the trim name. That said, always confirm with the breaker using your registration to make sure no engine-specific differences apply to your car.
I have a Peugeot 408 PHEV - is the brake master cylinder the same as the petrol-only version?
The PHEV (plug-in hybrid) variants of the 408 use a brake-by-wire or regenerative braking system that can differ significantly from the conventional hydraulic setup on the pure petrol models, meaning the master cylinder may be a different specification or integrated differently. You should not assume a petrol 408 master cylinder will directly swap into a PHEV car. Always confirm the correct part with your breaker, giving them your full registration number so they can check against the exact specification of your vehicle.
Where can I find a used brake master cylinder for my Peugeot 408 in the UK?
Findapart connects you with UK vehicle dismantlers (breakers) who can source a used brake master cylinder from a salvaged Peugeot 408 matching your engine size and build year. Provide your registration number when requesting a quote so the breaker can verify the correct specification before supplying the part. Prices and availability vary, so getting multiple quotes from different breakers is recommended.