Compare prices on a used Mercedes-Benz MB100 brake caliper from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used brake calipers vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
The MB100 van uses disc brakes with calipers on the front axle, so yes, front brake calipers do exist on this model. The rear brakes are drums, so there are no rear calipers to source. If you need a rear brake part, you are looking for a wheel cylinder or brake shoes rather than a caliper.
The MB100 was produced from around 1987 to 1996 as a single generation with no significant mid-life model change, but brake hardware could vary depending on engine size and GVW rating rather than model year alone. A van with a higher payload or a larger engine may carry a beefier caliper than a lighter-rated example of the same age. Always confirm the part against your registration and the weight plate in the vehicle, not just the year.
Yes, engine size and payload rating are the key factors on a van like the MB100 — larger or more heavily rated variants were often fitted with uprated brakes to suit their weight and power. A caliper from a lower-rated MB100 may not be the correct specification for a higher-GVW version. Check your vehicle's weight plate and confirm the engine size with the breaker before ordering.
Yes, front brake calipers are handed — the nearside and offside units are not interchangeable because the bleed nipple and hydraulic port positions differ between left and right. Always tell the breaker which side you need, and double-check by looking at the caliper on your vehicle before ordering. Getting the wrong side is a common and avoidable mistake.
Trim level and cosmetic specification make no difference to brake caliper fitment on the MB100 — what matters is the GVW rating and engine size, not the interior or exterior finish. Two MB100 vans may look identical but carry different calipers if one is a higher payload variant, so check your weight plate rather than relying on the model name alone. Confirm these details with the breaker against your registration to be sure.
Payload and GVW rating directly affect the braking specification on a van, so a caliper from a lower-rated MB100 may not be the correct part for a higher-rated vehicle, and vice versa. The rating is shown on the manufacturer's plate inside the van — check this rather than going by model name or year alone. Always confirm the GVW and engine size with the breaker before agreeing a purchase, as fitment cannot be guaranteed across different rating variants.