Findapart

BMW Z4 Tyre Replacement Parts

Get quotes for a used or replacement BMW Z4 tyre. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Buying a used BMW Z4 tyre: what matters

Fitment on a used tyre varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:

Other used BMW Z4 parts

Used tyre for other BMW models

Fitment questions

Does a tyre from an earlier BMW Z4 fit my newer one?

The BMW Z4 has run across two main generations — the E85/E86 (2002–2008) and the G29 (2019–present), with the intermediate F20-based Z4 not produced — and the two generations use different wheel sizes and offsets, so tyres and wheels are not simply interchangeable between them. Within the E85/E86 generation, tyre sizes can also vary depending on engine variant, as larger-engined cars such as the 3.0si and M Roadster were often fitted with wider rear tyres than the smaller four-cylinder models. Confirm the exact tyre size on the sidewall of your existing tyre or in your door-jamb placard, then check that against what the breaker has listed for their donor car's registration.

Does the BMW Z4 actually have tyres I can buy as a used part?

Yes, tyres are a genuine fitment on every variant of the BMW Z4, which has always been a rear-wheel-drive two-seat roadster or coupe. Used tyres are commonly sold by breakers when a car is dismantled with usable tread remaining, and they are worth considering if you need a temporary or budget solution. Always check the tyre's age (the four-digit DOT week/year code on the sidewall) and remaining tread depth before buying, and ensure the size matches your car exactly.

Will a tyre from a 2005 Z4 fit my 2007 Z4 — is there a facelift difference I need to worry about?

The E85 Z4 received a facelift in 2006, which brought some styling and equipment changes but did not fundamentally alter the wheel and tyre specifications for equivalent engine variants. That said, if the donor car is a different engine variant from yours — for example a 2.0i versus a 3.0si — the rim width or tyre profile could differ, so the generation boundary matters less than the engine size in this case. Confirm the exact tyre size and rim fitment with the breaker against both registrations to be sure before purchasing.

Does my Z4's trim level — for example sDrive20i versus sDrive30i on the G29 — affect which tyre size I need?

Trim level branding itself does not dictate tyre fitment, but on the G29 Z4 the engine variant does matter because the more powerful sDrive30i and M40i models are frequently fitted with wider rear tyres or larger-diameter wheels than the sDrive20i. This is a running-gear difference driven by power and weight distribution rather than cosmetic trim. Check the tyre size printed on your existing tyres or your vehicle placard and match that exactly when asking a breaker for a quote.

Can I use a tyre from a BMW Z4 M Roadster on my standard Z4 E85?

The Z4 M Roadster (E85 M variant, produced 2006–2008) used a staggered tyre setup with notably wider rear tyres than the standard Z4 models, so a rear tyre from an M Roadster will very likely be a different size to what a standard Z4 requires. Front tyres may also differ in width. Always compare the full tyre size — width, aspect ratio, and rim diameter — between the M donor car and your own car before buying from a breaker.

What tyre size should I ask the breaker to match for my BMW Z4?

The correct size depends on your specific car's generation, engine variant, and whether it runs a staggered fitment (different front and rear sizes), so there is no single answer that covers all Z4 models. The most reliable approach is to read the size off your existing tyres — for example 225/45R17 or 255/35R18 — and ask the breaker to confirm their donor car's tyres match that exactly. If your car has been fitted with non-standard aftermarket wheels, the placard size in the door jamb or owner's manual is the reference point for the factory specification.