Second Hand BMW X5 Slam Panel
Get quotes for a used or replacement BMW X5 slam panel. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Other used BMW X5 parts
Used slam panel for other BMW models
Fitment questions
Does a slam panel from an E53 BMW X5 fit an E70 X5?
No – the E53 (2000–2006) and E70 (2007–2013) are entirely different generations with different bodyshells, so the slam panels are not interchangeable. You need to source a slam panel that matches your specific generation. Always confirm the part against your registration with the breaker before buying.
Will a slam panel from a 2010 BMW X5 E70 fit my 2012 E70 X5?
The E70 ran from 2007 to 2013, so both years fall within the same generation and the slam panel is broadly the same structure. However, the E70 received a facelift around 2010, which brought changes to the front-end styling, so whether a pre-facelift panel crosses over to a post-facelift car is something you should confirm with the breaker against your registration before purchasing.
Does the slam panel differ between an E70 X5 and an F15 X5?
Yes – the F15 (2013–2018) is a completely different generation from the E70 (2007–2013) and the two slam panels will not interchange. Make sure you identify your generation correctly and source accordingly. Your breaker can verify the correct part using your registration number.
Does the trim level affect which slam panel I need – for example, does an xDrive30d use a different panel to an M Sport or xDrive50i?
The slam panel is a structural front-end component and is not changed between trim levels such as SE, xDrive, or M Sport within the same generation. You may find minor cosmetic differences around the panel depending on headlight or grille fitment, but the slam panel itself fits across trims. Confirm with the breaker if you have any concerns about your specific car's front-end setup.
My BMW X5 is a 2016 F15 – will a slam panel from a 2015 car fit?
Both 2015 and 2016 fall within the F15 generation (2013–2018), so the slam panel should be from the same platform. The F15 did receive some updates during its run, so it is worth checking with the breaker against your registration to make sure the panel matches your exact build.
Does the BMW X5 actually have a slam panel, or is it called something different?
Yes, the BMW X5 does have a slam panel – it is the structural panel that sits at the front of the engine bay, typically supporting the bonnet lock, radiator, and front crossmember area, and it is a genuine fitment on all generations of the X5. It is sometimes referred to as a front panel or bonnet lock panel by some breakers, so it is worth using both terms when requesting quotes. Your breaker will be able to confirm the correct part for your generation using your registration.