Used Audi Q2 Bonnet

The Audi Q2 (GA generation) ran from 2016 onwards, with a facelift introduced for the 2020 model year that brought revised front-end styling including updated lights, grille, and bumper. The bonnet itself may or may not have changed at that facelift boundary, so you should confirm with the breaker whether a pre-facelift or post-facelift bonnet is what you need. Quoting your registration to the breaker is the safest way to make sure you get the right panel.

Both a 2017 and 2018 Q2 are pre-facelift GA-generation cars, so a bonnet from either year should be from the same phase of the model and is very likely to be the same panel. That said, always confirm part numbers with the breaker against your registration before buying, as small production changes can occasionally occur mid-year. We can't guarantee fitment, but within the pre-facelift run this is a straightforward match.

The 2020 facelift is the key boundary here — Audi revised the Q2's front end at that point, and bonnets, lights and grilles can change together as a set. Whether the bonnet panel itself is interchangeable across that 2019-to-2020 boundary is something you must confirm directly with the breaker against your registration, as we can't state that as fact. Give the breaker both the donor and recipient registrations so they can check part numbers on both sides.

Trim level does not affect bonnet fitment on the Audi Q2 — the same panel is used across Sport, S line, Black Edition, Edition 1, and other grades within the same facelift period. You may find cosmetic differences such as badge placement or whether the bonnet came pre-painted in a specific colour, but the panel itself is interchangeable. Focus on matching the generation and facelift period rather than the trim name.

Engine choice makes no difference to bonnet fitment on the Q2 — the front-end panels are shared across the full engine range within a given facelift period. Whether you have a 1.0 TFSI, 1.4 TFSI, 1.5 TFSI, 1.6 TDI, or 2.0 TDI, the bonnet panel is the same. Just make sure the donor car is from the same facelift phase as your vehicle and you're good to proceed.

Give the breaker your full registration number so they can look up your exact build date and confirm whether your car is pre-facelift (up to approximately late 2019) or post-facelift (2020 onwards), as this is the critical fitment boundary for front-end panels. Trim level and engine make no difference, so don't worry about those details. A good breaker will check the part number from the donor vehicle against your registration before agreeing the sale.